Charge The Type 2 Socket Mercedes EV With A 3 Phase 32A Commando / CEE Socket.
The 3 Phase 16A CEE charger can deliver up to 11kW of current, but it will only provide the maximum current that the Onboard charger of the Mercedes vehicle will allow.
A 3 Phase 16A CEE socket is also required to use this charger. The CEE socket is also known as the Commando socket and industrial socket.
The available current settings for this charger are 8A, 10A, 13A, and 16A. If you require a 16A 3 Phase charger for use with a PV system (solar panels) at 6A, read on for information regarding our multi-adapter charger.
Choosing The Right Charger
The 16A CEE plug will be compatible with your industrial CEE socket if it is 3 Phase 16A, so please check that your CEE socket has 5 pins and states “16A” or “16” on the socket. If your socket is 3 Phase 32A, you will need the 32A CEE charger.
For EV charging, it’s important to ensure the power socket is suitable. Therefore, we recommend a qualified electrician to certify that both the socket and supply are suitable for EV charging.
The Mercedes has a Type 2 socket as standard, ensuring compatibility with this charger. Please note that the manufacturer of this vehicle did not manufacture this charging cable.
Please also check the information at the top of this page, “Please Read Before You Buy”, to help avoid the most common reasons for returning a charging cable.
Do You Want A Charger With Multiple Adapters?
If you’re in search of an EV charger that is compatible with various power sockets, then consider our multi-adapter charger. The charger supports charging from both 1 Phase and 3 Phase sockets, and provides a current range of 6A to 32A.
This charger allows connection to a variety of outlets. For instance, the 3 pin and 5 pin Commando sockets, the 13A mains socket, and the 16A Euro (Schuko) socket. You have the flexibility to choose the specific adapters you need for your charger. Furthermore, it incorporates a charging timer, enabling charging to start anywhere from 1 to 10 hours after being plugged in. When using the 3 pin UK plug adapter, the charger will automatically select a safe 10A charging mode.
For a detailed breakdown of the maximum currents provided by the multi-adapter charger when used with different adapter/power outlets, refer to the table below:
Adapter & Outlet | Max kW |
---|---|
3 Phase CEE 32A | 22kW |
3 Phase CEE 16A | 11kW |
1 Phase CEE 32A | 7,4kW |
1 Phase CEE 16A | 3,7kW |
UK 13A | 2,2kW |
Schuko 16A | 3,7kW |
The maximum current displayed in the above table will not necessarily align with the current that the EV/PHEV can accept. In other words, the vehicle can only accept up to the maximum current of its onboard charger (OBC).
EV Cable Bag And Case
We provide a canvas cable bag (suitable for cables up to 10M) to store this charger when not in use. The bag can also be upgraded to a cable carrier case made from EVA material, which has improved waterproof and impact protection. The EVA case has an elasticated strap in the bottom compartment and elasticated mesh pocket in the top to allow convenient storage of two cables. The EVA case can hold two cables, provided each cable is no longer than 10 meters (with a total combined length of 20 meters) and is neatly wound. You can replace the canvas cable bag with an EVA case by selecting the option available in the basket or on the checkout page.
3 Phase 16A CEE Charger Features
IP55 protection for the control box. TUV approved.
Certification: UKCA, CE.
Charging Timer: The charger will charge your EV from 1 to 10 hours after being plugged in. Thus enabling charging during off peak electricity rates.
Type A and Type B residual current fault detection: 30mA AC + 6mA DC.
Built in fault detection: Over voltage / under voltage, over current, short circuit protection.
PCB Overheating protection: The charging current will automatically reduce if the circuit board in the device box exceeds 75 degrees.
4 amp settings: 8A, 10A, 13A, and 16A
LED display: Real time charging information
3 Phase 16A CEE Charger Technical Data
Charging cable type | 5-pin red CEE / Commando to Type 2 (IEC 62196-2) connectors |
Cable lengths available | 5Metre, 8Metre |
Rated current | 8A, 10A, 13A, 16A |
Certification | CE, UKCA, TUV tested |
Cable from control box to power outlet | TPE 5×2.5+2×0.5mm. Length including plug: 90cm |
Cable to Type 2 vehicle plug | TPU 5×2.5+1×0.5mm |
Control box dimensions | 235mm (H) x 105mm (W) x 65mm (D) |
IP grade | Control box: IP55. Plugs when connected to sockets: IP55 |
Operating voltage | 380V-415V AC |
Leakage protection | AC leakage 30mA. DC leakage 6mA |
Working temperature | -30°C to 50°C |
Flame retardant | UL94 V-0 |
Insulation resistance | 10MΩ |
Altitude | -≤2000m |