Peugeot e-Rifter – Spiral Charging Cable 1 Phase 32A 7kW. Type 2 to Type 2

£144.00£168.00 vat included

Coiled charging cable for charging the Peugeot e-Rifter at a Type 2 public charging point or wall charger. This single phase coiled cable can charge up to 7.4kW. Available in lengths of 5M, and 8M. However, the working length of a coiled cable (so that the cable is not overstretched) is around 2 metres less than the stated length. Cable bag included.

Please Read Before You Buy
Our cables are normally returned for one of the reasons below. Reading this information may help you to avoid having to send your order back to us. Please also read the Cable Description further down the page as it contains important information about this Type 2 to Type 2 charging cable.

  • Is your vehicle already supplied with a Type 2 charging cable? Please ask your dealer / seller if they have included an EV cable with your vehicle.
  • Is your cable long enough? Measure the length from your wall charger to where your vehicle will usually be parked (the Type 2 vehicle socket is usually on the right side, to the rear of the vehicle) and add half a metre to avoid overstretch. If you are using the charging cable with a public charging point, the 5 metre cable (8M for a spiral cable) is recommended as the 3 metre length can sometimes be too short.
  • Is this an extension cable? No. It cannot be used to daisy chain / convert a tethered cable or home / mains charger. It can only be used to plug directly in to the socket of the charging point.
  • Is this the correct type of charging cable for my vehicle? If you know that your vehicle has a Type 2 socket, then this Type 2 cable is compatible with your vehicle. If you are unsure, check the list of Type 2 electric vehicles below or use our EV Cable Finder.
  • Is this a rapid charging cable? This is not a CCS cable. If you want a cable to use with a DC rapid charger, you do not need to buy one as the cable is always attached to the unit.
Cable Care & Safety
Our cables will give you years of trouble free use if you follow the safety instructions in the user booklet that you will receive with your charging cable. Please read it before using the cable. If you do not receive the user booklet, please let us know. Please also check out our EV Cable Care Guide for tips on how to safely use your EV cable and how to avoid the most common reasons why a Type 2 charging cable will stop working.

Click the options below to view the price and availability. Click “Clear” to reset the options. Please read all of the product information below before purchasing.

Next Working Day shipping for goods showing as In Stock. Order before 1pm. Excludes weekends and bank holidays. For goods displayed as Preorder, the expected shipping time will be displayed above.

  • UK company. 14 day returns.
  • Major payment cards accepted.
  • Pay by Klarna. Terms apply.
Secure Checkout

Mastercard, visa, klarna, american express, paypal, apple pay, google pay, microsoft pay accepted

Use A Peugeot e-Rifter Compatible 32A 7.4kW Coiled Cable For Connecting All Models Of The Peugeot e-Rifter To A Type 2 Socket Charging Point

Our 7kW Type 2 to Type 2 coiled charging cable will provide up to 7.4kW and can be plugged into the Type 2 socket of the Peugeot e-Rifter and any Type 2 charging point that does not have a cable already attached to it. It does not matter if the charging point is 3 Phase or 1 Phase because the charging point will work out how much current your Peugeot e-Rifter will accept and how much current the cable can handle. The cable can therefore be used with ALL Type 2 charging points with an open socket and the Type 2 socket of the Peugeot e-Rifter. This cable is not an extension cable and it will not work if it is connected to another Type 2 plug. It is therefore not suitable for charging points with a cable already attached to it (a tethered cable) or as an extension for any other charging cable The working length of a coiled cable is about 2 metres below their stated length.

Type 2 male plug being inserted into a Type 2 charging station socket
Picture showing a Type 2 EV socket and a CCS socket
9 hole Type 2 / CCS socket and a 7 hole Type 2 socket

Is This 7kW Spiral Cable Compatible With The Peugeot e-Rifter?

Choosing The Correct Charging Cable

Our Type 2 coiled cables adhere to the IEC 62196-2 standard. This ensures compatibility with Type 2 socket charging points and any Type 2 socket-equipped vehicle, such as the Peugeot e-Rifter.

The vehicle and charging point will communicate with each other to ensure they deliver the precise amount of current to the vehicle. Therefore, it does not matter if a charging cable can supply more power than the vehicle can accept.

This cable is therefore suitable for charging the Type 2 socket of the Peugeot e-Rifter. Please note that the manufacturer of this vehicle did not manufacture this charging cable.

Most electric vehicles sold in Europe come with a Type 2 socket, which may have either a 7 hole charging socket or a 9 hole CCS socket. CCS (Combined Charging Socket), accommodates the Type 2 cable in its 7 hole upper chamber.

Choice Of Cable Bags

We provide a free canvas cable bag (suitable for cables up to 10M) to store this charger when not in use. You can also upgrade the bag to a cable case made from EVA material for enhanced waterproofing and impact protection. The EVA case has an elasticated strap in the bottom compartment and elasticated mesh pocket in the top. So it allows convenient storage of two cables. The EVA case can therefore carry 2 cables if each cable does not exceed 10 metres length (20M total length). You can replace the canvas bag with an EVA case by selecting the option in the basket or checkout page.

Photo of EV canvas bag and waterproof case

Additional information

Weight 2.5 kg
Length (Metres): No selection

3M, 5M, 8M, 10M, 15M, 20M

Cable Colour: No selection

Green, Black

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.